Hold and drag area
Press, hold, drag. Release when you are done.
Mouse Button Hold and Drag Test
This mouse button hold and drag test checks that your switch stays down. Press and hold the left button inside the box, then drag slowly around it. A healthy switch holds for as long as you like; a tired one drops the connection and the box flashes coral.
Hold statistics
- Current hold
- 0.00 s
- Longest hold
- 0.00 s
- Unexpected drops
- 0
Test hold stability the way a drag-and-drop would
1. Hold for thirty seconds
Press the left button and keep it down without moving. The hold timer climbs; it should never reset on its own.
2. Drag slow shapes
While holding, draw loops across the box. Rapid direction changes stress the switch spring and reveal weak contacts.
3. Repeat five times
Drops are intermittent. Five holds of twenty seconds each give the fault a fair chance to show.
What makes this hold test useful
Detects drops mid-drag
The tool watches the button state on every move event, so a release of even a few milliseconds is caught.
Live trail
The drag path is drawn as you move, so you can see exactly where the connection dropped.
Longest-hold record
Compare mice or buttons by how long each one holds without a drop.
Pointer capture
The hold keeps counting even if the cursor leaves the box, matching how real drags behave.
Terms used in hold and drag testing
- Hold drop
- The mouse reports a release while you are still pressing. Causes files to land in the wrong folder and selections to break.
- Contact oxidation
- A film that forms on switch contacts and causes intermittent connection, especially under light pressure.
- Pointer capture
- A browser feature that keeps sending events to the test box even when the cursor moves outside it.
- Actuation force
- The pressure needed to keep the switch closed. Worn springs need less, which paradoxically causes drops under slight lifts.
Hold and drag questions
The box said dropped but I think I lifted my finger. Which is right?
The tool only flags a drop when the button state changes while movement continues. If you did lift, run it again and hold firmly.
Why does my wireless mouse drop during long holds?
Aggressive power saving can briefly sleep the sensor. Disable low-power mode in the mouse software and charge the battery.
Does this test the right button too?
This page tests the left button, which does nearly all dragging. Use the home page button test for a quick right-button hold.
How long should a switch hold?
Indefinitely. Any drop during a steady hold is a fault, not a feature.
Fix drops the test revealed
Drops only during fast direction changes
Spring fatigue. Replace the switch or the mouse; cleaning rarely fixes mechanical wear.
Drops at random while holding still
Oxidised contacts. Compressed air and firm presses can help temporarily; replacement is the real fix.
Drops on a wireless mouse only
Interference or power saving. Move the receiver to a front USB port and disable sleep timers.